W485 - WiFi module for G16, G16T
• W485 Wi-Fi module is an add-on to TRIKDIS communicators G16, G16T, control panel SP231 and radio transmitter T16, providing WiFi connectivity. • With communicators G16 and G16T it provides a transparent primary communication channel via WiFi. This allows to control the alarm system with communicator remotely via Protegus app when it is connected via WiFi. • With control panel SP231 and radio transmitter T16 the w485 module only sends events, without the ability to remotely control via Protegus app via WiFi.
|
Parameter |
Description |
|
Power supply voltage |
10-28 VDC |
|
Current consumption |
100 mA (stand-by), Up to 200 mA (transmitting) |
|
Compatible with |
Trikdis communicator G16/G16T Trikdis control panel SP231 Trikdis radio transmitter T16 |
|
Wi-Fi frequency |
2.4 GHz |
|
Wi-Fi protocol |
802.11 b/g/n |
|
Type of Wi-Fi antenna |
RP-SMA |
|
Security mode |
WPA, WPA2, WPA mixed |
|
Network configuration type |
DHCP or manual network configuration (using phone or laptop) |
|
Operating environment |
From -10 °C to 50 °C, with relative air humidity 80% when +20 °C |
|
Dimensions (with Wi-Fi antenna) |
18 x 3 cm |
Configuration
With communicators G16 and G16T. WiFi connection credentials are set in G16 or G16T settings, in RS485 modules menu. Please find configuration instructions in G16 and G16T installation manual.
With control panel SP231 and radio transmitter T16. WiFi connection credentials are set using internet browser. Please find instructions in W17U installation manual.