G16T - GSM telephone line communicator 1 IN / 2 OUT 12Vdc
• Communication with control panel: Via landline commicator (TLC terminal) • Data channel: GPRS or 3G / SMS • Data communication protocol: TRK, DC-09_2007, DC-09_2012 • Inputs: 1 input NC/NO type • Outputs: 2 outputs “open collector” type, 1A DC, 30V • Mobile application support: PROTEGUS
|
Parameter |
Description |
|
2G modem frequencies |
850 / 900 / 1800 / 1900 MHz |
|
3G modem frequencies |
800 / 850 / 900 / 1900 / 2100 MHz |
|
4G modem frequencies |
Depends on region |
|
Power supply |
DC 10-18V |
|
Current consumption |
60-100 mA (on standby) Up to 250 mA (while sending data) |
|
Transmission protocols |
TRK, DC-09_2007, DC-09_2012 |
|
Message encryption |
AES 128 |
|
Memory |
Up to 60 messages |
|
Inputs |
2, selectable type input: NC, NO, NC with EOL, NO with EOL, NC with DEOL, NO with DEOL |
|
Output |
1 x OC type, commutating up to 1A DC, 30 V max |
|
Configuration |
With TrikdisConfig computer program remotely or locally via USB Mini-B port Remotely with SMS messages |
|
Operating environment |
Temperature from -10 °C to 50 °C, relative humidity – up to 80% at +20 °C |
|
Communicator dimensions |
92 x 65 x 26 mm |
Features
Connects to panel‘s landline dialer:
- Communicator can be connected to control panel’s landline dialer with 2 or 4 wires.
- When connected with 4 wires, the landline between the panel and communicator will be monitored.
Sends events to monitoring station receiver:
- Sends event information to TRIKDIS software or hardware receivers that work with any monitoring software.
- Can send event information to SIA DC-09 receivers.
- First and second communication channels can operate simultaneously and send information to two receivers at same time.
- Backup channel, that will be used if connection with the primary channel is lost.
- Event reporting via SMS messages. Messages will be delivered even if data connection stops working in the mobile operator network.
- Simultaneously transmits full event information to Alarm Receiving Center and works with Protegus app. Priority is for transmitting events to the Alarm Receiving Center.
Works with Protegus app:
- “Push” and special sound notifications informing about events.
- Remote Arm/Disarm feature.
- Take full control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
- Temperature monitoring (with iO or iO-WL expanders).
- Different user rights for administrator, installer and guest user.
- Users can also be informed about events with SMS messages and phone calls.
Quick configuration:
- Settings can be saved to file and quickly written to other communicators.
- Two access levels for configuring the device.
- Remote configuration and firmware updates.
Controllable outputs and inputs:
- 1 output, controlled via:
- Protegus app.
- SMS message.
- 2 inputs, selectable type: NC; NO; NC/EOL; NO/EOL; NC/DEOL; NO/DEOL.
- Add additional inputs and controllable outputs with wired and wireless iO expanders.