CG17 - GSM Alarm panel 4 zones 8 areas 2 PGM

• Inputs: 4 inputs, NC/NO/EOL type on mainboard (can be expanded) • Area count: 8 areas • PGM outputs: 2 PGM outputs on mainboard (can be expanded) • Keyboards: - • Mobile application support: PROTEGUS

CG17 is a multifunctional security control panel with an integrated celullar communicator.

With the CG17 you can:

• Install a simple security system that can be monitored and controlled remotely.
• Control various equipment remotely (e.g. heating and ventilation systems, automatic gates) and monitor temperature.
• Notify users about events.
• Send event notifications to the receiver of a security company.

Features

Messages to the security company

• Reports events to TRIKDIS software or hardware receivers which are capable of working with any monitoring software.

• Can report events to SIA DC-09 receivers.
• In case connection to primary channel is lost, can send to backup receiver.
• Can report events to the central monitoring station using SMS messages. Extremely useful because it works even when IP connectivity is disrupted in the mobile operator’s network.

• Cellular network jamming recognition.
• Can simultaneously report events to the security company’s receiver and work with the Protegus app. Possible to set priority for sending events to central monitoring station.

Messages to users

• Calls specified phone numbers (up to 8 users) and informs about events using recorded voice messages.
• Sends SMS messages about events.
• “Push” and special sound event notifications using the Protegus application.

System and output control

• Using Protegus app.
• Using contact (iButton) key reader.
• By calling the device’s phone number.
• Using SMS messages.
• Using an automatic “if…then” algorithm.  E.g. when an input is enabled or the temperature exceeds a certain limit, an output will be turned on.

Expander, GPS receiver and battery support

• iO series expanders, which increase the number of inputs (IN) and outputs (OUT).
• GPS receiver (useful for protecting ATMs and vending machines).
• Backup power and charging of 12 V battery.

Settings and installation

• Quick and simple installation.
• Configuration of device either using an USB cable or remotely using TrikdisConfig software.
• Remote updating of firmware.
• Two types of access levels (accounts), for the installer and for the administrator.

Inputs and outputs

• 1 input, 2 outputs and 3 double I/O terminals that can be set either as input (IN) or output (OUT) terminals.
• One wire data bus (1-Wire) for connecting temperature sensors (up to 8) and a contact (iButton) key reader.
• Using iO series expanders, the number of inputs (IN) or outputs (OUT) can be increased to 12.