CH4HR - Four control channel wireless receiver
The
set consists of four relay outputs receiver and one hand-held
transmitter designed for use in radio remote control and access control.
The system uses KEELOQ (*) dynamic code technology and the receiver operates with all Elmes made 433,92MHz band transmitters and wireless detectors.
Operation.
Activating
transmitter stored in receiver memory results in setting on respective
relay output. Depending on user programming, as described in sub-close 2
of the programming procedures, two modes of the receiver’s relay
outputs operation are possible: temporary output set on lasting from
0.5s up to 4h on each signal received from transmitter and bistable
outputs set on in on-off (latched) mode activated by consecutive signals
received from the transmitter.
Manual - for mini control panel CH4HR.
Manual - for receiver CH4HR.