Receiver module for connecting Ajax detectors to wired and hybrid security systems. The device is integrated into any central unit with wired security areas. - Sends triggering using dry contacts - Can operate in pulse and bistable modes - Is adjusted via configurator for PC
Maximum performance
Protection from intruders and failure
Effortless operation
Simple professional-level installation
Tech specs
Use: |
Indoor |
Radio signal power: |
25 mW |
Communication protocol: |
Jeweller (868.0−868.6 MHz) |
Maximum distance between detector and ocBridge: |
Up to 2,000 m (6,552 ft) (in open area) |
Maximum number of connected devices: |
100 |
Detection of jamming: |
Yes |
Detector performance monitoring: |
Yes |
History of alarms and service events: |
Yes |
Connection of external antenna: |
Yes |
Software update: |
Yes |
Number of wired outputs/inputs: |
13 (8+4+1)/1 |
Power supply type: |
+/- connectors; miniUSB (only when configuring ocBridge) |
Power supply voltage: |
DC 8 – 14 V; miniUSB 5 V (only to configure the system) |
Operating temperature range: |
From -20°С (-4°F) to +50°С (+140°F) |
Operating humidity: |
Up to 90% |
Dimensions: |
95x92x18 mm (3.74×3.62×0.70 in) (with antennas) |