MotionCam is a wireless motion detector with visual alarm verification for indoor use. - Transmits a photograph in under 9 sec - Detects movement at up to 12 meters, ignores animals, but recognizes a human move instantly. - Sees in the dark - Operates up to 4 years on the pre-installed batteries - Communicates at a distance of up to 1700 m from the hub
|
Sensitive element |
PIR sensor |
|
Motion detection range |
Up to 12 m |
|
Motion detector viewing angle (H/V) |
88.5°/80° |
|
Image resolution |
Up to 640 × 480 pixels |
|
Number of photos taken when alarm is raised |
Up to 5 photos/single alarm |
|
Infrared illumination for shooting in the dark |
Yes |
|
Pet immunity |
Weight up to 20 kg, height up to 50 cm |
|
Tamper protection |
Yes |
|
Frequency band |
868.0 – 868.6 MHz or 868.7 – 869.2 MHz, depending on the sales region |
|
CMS compatibility |
Motion alarms are transmitted to CMSs that support SIA and Contact ID
protocols. |
|
Maximum RF output power |
Up to 20 mW |
|
Radio signal modulation |
GFSK |
|
Radio signal range (line-of-sight) |
Up to 1,700 m |
|
Power supply |
2 CR123A batteries, 3 V |
|
Battery life |
Up to 4 years |
|
Operating temperature range |
From 0°C to +40°C |
|
Operating humidity |
Up to 75% |
|
Overall dimensions |
135 × 70 × 60 mm |
|
Weight |
167 g |