Purpose:
The PO-6x series manual call points are designed for manual activation of smoke flaps in fire safety systems. They are suitable for both surface-mounted and flush-mounted installation indoors.
Available types:
- PO-61: Manual call point with FIRE signaling (flap activated)
- PO-62: Manual call point with FIRE signaling and equipped with a reset switch
- PO-63: Manual call point with FIRE, OK (ready-state), FAULT signaling and equipped with a reset switch
These manual call points are intended for use with the UCS-4000 system.
Certificate: CNBOP 2209/2006
| Case tightness | IP 30 |
| Hole dimensions for flush mounting | Φ78 x 30 mm |
| Case color | Orange |
| Maximum installation wire cross-section | 1 mm² |
| Wire reserve for connection | 15 cm |
| Operating temperature range | -25°C to +55°C |
| Overall dimensions | 102.5 x 98 x 45.5 mm |
| Maximum weight | 220 g |
The device is activated by striking or pressing the protective glass, which then allows access to the activation button. Pressing the button sends a signal to the smoke flap control panel. The PO-62 and PO-63 models are equipped with a reset switch, which allows the servo motor to return the flap to the ready position. Resetting is performed with a special key. The device is certified for use in fire safety systems and is designed for reliable operation in a wide temperature range.