ROP-63H Manual Call Point
The ROP-63H is a conventional manual call point designed for transmitting fire alarms manually to a fire alarm control panel. It is equipped with a non-breakable, multi-use plastic glass for enhanced durability and safety. The device is suitable for outdoor mounting and is intended for in-plaster wall attachment, but can also be mounted on-plaster using a special assembling frame. ROP-63H manual call points are installed in detection lines of the IGNIS 1000 conventional system and are certified according to CNBOP 2121/2006.
| Type | Conventional |
| Purpose | Manual fire alarm activation and transmission to control panel |
| Co-operation | Installed in detection lines of IGNIS 1000 conventional system |
| Certificate | CNBOP 2121/2006 |
| Power Supply | From the fire alarm control panel |
| Case Tightness | IP 55 |
| Operation Temperature Range | -40°C to +70°C |
| Maximum Resistance of Closed Contacts, mΩ | 150 |
| Minimum Switching Voltage, V | 12 |
| Maximum Contact Load at 30V DC or 50V AC, A | 3 |
| Maximum Wire Cross-Section, mm² | 2.5 |
| Wire Reserve for Connection, cm | 15 |
| Dimensions (mm) | 102 x 98 x 46 |
| Weight, kg | max. 0.5 |
The ROP-63H does not contain electronic circuits and does not provide feedback signaling to the control panel. It also does not have an activation indicator. The manufacturer equips the ROP-63H with a 1 kΩ resistor for compatibility with IGNIS 1000 systems.