• Redundant power supply EN54 27.6V / 7A / 2x17Ah. • Dimensions 420x420x102 mm. • Output 6.0A / 27.6VDC. • Tamper contact 1xNC. • Battery installation 2x17Ah. • Alarm outputs. • Seven-segment liquid crystal display. • Red Power Series.
|
Adapter type: |
Transforming |
|
Input voltage: |
230 V AC |
|
Output voltage: |
22 V ... 27.6 V (buffer operation) |
|
Maximal load: |
6 A (continuous operation) |
|
Battery charging current: |
1 A |
|
Power: |
193 W |
|
Number of outputs: |
2 |
|
Main features: |
· LED display · Load current control · Output voltage control · Acoustic indication of failure · Output of collective failure EXTi · Output of collective failure ALARM · Microprocessor-based automation system · Optical indication of power supply unit overload OVL · Accelerated battery charging function · Intelligent power supply unit overload protection · "SERIAL" communication port with implemented MODBUS RTU protocol · Free software "PowerSecurity" for monitoring the Power Supply Unit operation parameters |
|
Protections: |
· Short-circuit · Overload · Overvoltage · Overheat · Tamper · Reverse polarity connection · Discharge · Overcharge |
|
Adapter operation control: |
· AC input voltage presence indication AC · DC output voltage presence indication DC · EPS FLT output - indicating AC power collapse · APS FLT output - Battery fault indication · PSU FLT output - Power Supply Unit fault indication · Failure codes with history display |
|
Place for battery: |
2 x 12V/17Ah |
|
Max. battery dimensions: |
370 x 180 x 95 mm |
|
Supported norms: |
PN-EN 54-4 |
|
Operation temp. / Relative humidity: |
-5 ... 75 °C / 20 ... 90 % |
|
Weight: |
10.4 kg |
|
Dimensions: |
420 x 420 x 102 mm |