The TSV-1000/16 Video Separator is designed to provide additional protection for sixteen signal lines, such as those used in CCTV installations. It safeguards expensive devices (cameras, DVRs, monitors, etc.) from:
- Lightning discharges
- Voltage differences and surges between devices
- Electric currents in video signal cables
The device eliminates signal disturbances that can occur during transmissions over distances of several hundred meters.
The images below illustrate the galvanic isolation provided by the TSV-1000/16:
(Click on the picture to enlarge)
The following diagram shows an example of connecting the TSV-1000/16 video separator. It helps eliminate signal disturbances caused by voltage differences between the camera ground and monitor ground, which can result in low-frequency interference (e.g., slowly moving vertical black bars).
(Click on the picture to enlarge)
For complete protection of all devices connected to the transmission line against lightning discharges, the connection diagram below is recommended.
(Click on the picture to enlarge)
| Power | 230V AC / 50Hz |
| Power consumption | 12W |
| Input impedance | 75Ω |
| Output impedance | 75Ω |
| Number of inputs | 16 x BNC |
| Number of outputs | 16 x BNC |
| Video bandwidth | 9MHz / 1Vpp |
| Galvanic isolation between input signals (max voltage) | 1000V (peak) |
| Galvanic isolation between output signals (max voltage) | 1000V (peak) |
| Galvanic isolation between inputs and outputs (max voltage) | 1000V (peak) |
| Galvanic isolation between power supply and inputs/outputs (max voltage) | 1000V (peak) |
| Case type | 1RU (19") |
| Dimensions | 44 x 490 x 250 mm |
| Weight | 3 kg |
The device effectively eliminates interference during signal transmission over distances of several hundred meters.