The T-12 Heating for Cameras is designed to provide optimal and safe operating conditions for cameras and lenses by preventing unwanted phenomena such as fogging, freezing, and condensation on the camera housing under the influence of low temperatures. The device features a built-in thermostat that activates the heaters when the internal temperature drops below a certain threshold, ensuring reliable camera performance even in harsh environments.
After opening the camera housing, it is necessary to attach the thermostat board to the end of the mounting panel and connect the DC +12V power supply to the red cable, and ground to the black cable. The device is equipped with protection against incorrect power polarity. After installation, it is important to check the correct operation of the camera by closing the jumper on the thermostat board (e.g., with a screwdriver). The heaters will turn on, and then you should verify the proper functioning of the camera.
| Thermostat activation temperature: | 3 °C |
| Housing type: | |
| Camera power supply unit: |  |
| Power supply: | 12 V DC |
| Power consumption / current draw: | max. 5.5 W / 460 mA |
| Dimensions: | 57 x 32 x 15 mm (plate with heaters) |