• Equipped with the 32-bit high-speed processor • RS-485 and Wiegand (W26/W34) protocol • Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No • Supports tampering alarm • Built-in buzzer for identifying the reading status • Online upgrade function • Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader
|
System Parameters |
||
|
ID Settings: |
Setting by the DIP Switch on the Main Board |
|
|
Card Reading Distance: |
Mifare Card:≤50 mm (≤1.97") |
|
|
Processor: |
32-bit |
|
|
General |
||
|
Power Supply: |
12VDC |
|
|
Audio Alert: |
Beeper |
|
|
Communication Interface: |
RS-485 / Wiegand (DIP Switch) |
|
|
Key Board: |
No Keypad (DS-K1107E and DS-K1107M) |
|
|
Power Consumption: |
≤2W |
|
|
LED Indicator: |
Power Indicator; Status LED Indicator |
|
|
Protection Level: |
IP 65 |
|
|
Installation: |
Wall mounting with screws. The Gang Box is not supported. |
|
|
Temper-Proof: |
Support |
|
|
Working Humidity: |
10% to 90% (Non-Condensing) |
|
|
Working Temperature : |
-20°C to +65°C (-4°F to +149°F) |
|
|
Dimensions (L×W×H): |
115mm × 44mm × 22mm (4.53''×1.73''×0.87'') |
|